The hatch gets a Yonaka catback exhaust and more low

So, this whole coronavirus social-distancing has motivated me to do some more blogging. Figured I would do an update post on the 1999 Civic DX hatchback. It's coming up on one year of ownership. Currently the car has just over 51,000 miles. Pretty low for a 21 year old car, eh? ;) I've put about 16k miles on it in the 11 months of ownership. One of the (few) bonuses of the coronavirus thing is I'm not adding 400 more miles to the odometer each week. Ha Ha #cuphalffull

Had to drop by JDM Legends after the first round of mods and show Eric what I picked up last year.

Ok, so not a ton happened for months on the car. Just enjoying 41mpg on the daily and carving corners wherever I could. Then, one day while driving home on the freeway, I started hearing my exhaust. I know right!? Weird! LOL You're not supposed to hear the stock factory DX exhaust. Got home and put it up on jacks and turned the car on and got under the car. I found a silver dollar sized hole in the exhaust pipe right in front of the resonator. I bought a cheap Autozone patch and it worked for about 6 weeks. Then right before heading across the country for Christmas break, I pulled the car out of the garage to wash it and the exhaust was loud again and heard it dragging on the ground. No bueno! The patch had completely become useless and my pipe was fully separated and split in two.
I had already purchased a Yonaka 96-00 EK 3dr Hatchback catback exhaust. The problem was it was on backorder with an 8-12 week delivery.

"Pantera Corey" welding up the short patch tube on the stock exhaust while I wait for the Yonaka system to arrive.

My friends helped a brother out. "Porsche Kris" let me use his lift and "Pantera Corey" welded up my temporary exhaust pipe patch section. This all went down January 3rd after we got back from Georgia. My Yonaka catback was on a boat from China, literally, and didn't arrive until February. It finally got installed Feb' 21st. The patch held up great! Thanks guys!

The Yonaka system is a very nice quality system for the price ($240 shipped).

Nice quality welds and stainless steel materials.

Out of the box the Yonaka system was very nice quality. I paid $240 shipped, but that was because it was on backorder from October to February. Hey, I'll take it. I'm on a serious budget! I chose Yonaka for a few reasons. First, I couldn't afford a name brand system like Greddy or the like. Second, I wasn't going to go cheap and buy an eBay system. Third, most eBay systems use the big 4" round "fart can" muffler. That's just not my style. Unless I could get the muffler angled up "JDM style" I wasn't going round muffler style. Fourth, I wanted a more quiet system and preferably an oval shaped muffler. To me the oval muffler is a classier look. Unless I'm going super lightweight, time attack race style with Titanium materials, the oval muffler is better suited for my daily driving.

The Yonaka and the OEM catback systems laid out next to each other. Look at how the OEM has a slight bend after the heatshield. Hmm...

Yonaka catback installed. Notice the fitment...

The removal of the 21 year old OEM exhaust was easy and the install of the Yonaka was pretty straight forward. They supplied new hardware for the system but not the mounting hardware to connect up to the catalytic converter. My issue with the system is the fitment. The muffler ended up being about 1/2" to 1" shifted over to the right. I played around with the 2 lengths of rubber exhaust hangers on the car. The problem was, if I was able to get the system shifted to the left, it was really close to hitting the bottom of the car at the 90 degree bend section.

Overall I'm happy with it. If I can bend the 2 hangers on the muffler at some point to get fitment more on point, I'll do it.

A week or so after doing the exhaust, I finally decided to adjust the coilovers again. I've been wanting to go a little lower on ride height. I ended up only lowering it about 1/2" all around, but it made a difference in the look for sure. I also added about 1/4" more negative camber up front. I think that added about .5 degrees. It is very similar to the rears, which were at -1.1 and -1.4 degrees per the alignment shop. Since I dropped the rear 1/2" as well, it probably gained a couple tenths of a degree of camber. So, everything is probably at about -1.3 to -1.5 degrees. Should give me good handling without sacrificing tire wear. I didn't adjust front or rear toe at all. My tires show very little wear. The Hankook all-seasons are doing awesome!

All in all, I'm loving the hatchie! I've had fun adjusting the coilovers. The car handles great, is economical and I love washing it and keeping it super clean! Enjoy these beauty shots! I want to do some blogs about the top Civic hatchbacks that are inspiring me right now and giving me ideas for my own car. Hopefully I don't go 6 months before posting again. No promises!

Rear shot looking down the side profile for an idea of the fitment and camber.

What's next for the hatchie? I really want to do a front lip. My favorite lips right now are the First Molding, Spoon Type One or Tactical Art. They're all carbon fiber and start at like $400 plus shipping. Soooo, I'll probably end up going with a urethane eBay replica of one of those at first.

Cool top view from the porch. I always hand wash in my front lawn. Loving the white 949 Racing 6UL wheels with the Roma Red. 

Some cool news! I submitted an application to be sponsored by MPC, a tuning shop in the midwest who specializes in machined aluminum hardware, suspension bits and k swap parts. I was accepted! There is a "care package" in the mail. More to come on that! Pretty exciting. My first sponsor!